SMT12F-03W2V6J View Datasheet(PDF) - Artesyn Technologies
Part Name
Description
MFG CO.
'SMT12F-03W2V6J' PDF : 4 Pages View PDF
SMT12F Series
3.3 Vin and 5 Vin single output
DC-DC CONVERTERS F Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
31.2 W
39.6 W
INPUT
VOLTAGE
2.97-3.63 Vdc
3.0-5.5 Vdc
OUTPUT
VOLTAGE
0.9-2.6 Vdc
0.9-3.3 Vdc
OUTPUT
CURRENT
(MIN.)
0A
0A
OUTPUT
CURRENT
(MAX.)
12 A
12 A
EFFICIENCY
(TYP.)
92%
95%
REGULATION
LINE
LOAD
±1.0%
±1.0%
±1.0%
±1.0%
MODEL
NUMBER (7, 8)
SMT12F-03W2V6J
SMT12F-05W3V3J
Part Number System with Options
SMT12F-05W3V3J
Product Family
SMT = Surface Mount
Packaging Options (7)
J = Pb-free (RoHS 6/6 compliant)
Rated Output Current
12 = 12 Amps
Performance
F = Enhanced/Fast Transient
Output Voltage
2V6 = 0.9 Vdc to 2.6 Vdc
3V3 = 0.9 Vdc to 3.3 Vdc
Type of Output
S = Single Fixed
W = Wide
Input Voltage
03 = 2.97 Vdc to 3.63 Vdc
05 = 3.0 Vdc to 5.5 Vdc
Output Voltage Adjustment of the SMT12F Series
The ultra-wide output voltage trim range offers major advantages to users who select the
SMT12F. It is no longer necessary to purchase a variety of modules in order to cover
different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to
2.6 Vdc or 0.9 Vdc to 3.3 Vdc. When the SMT12F-05W3V3J converter leaves the factory
the output has been adjusted to the default voltage of 3.3 V. When the SMT12F-03W2V6J
converter leaves the factory the output has been adjusted to the default voltage of 2.6 V.
Vin
Vout
Unit
4.5-5.5 Vdc 0.9-3.3 Vdc 05W3V3J
< 4.5 Vdc 0.9-2.0 Vdc 05W3V3J
2.97-3.63 Vdc 0.9-2.6 Vdc 03W2V6J
Notes
1 The SMT12F features an ‘Active Low’ Remote ON/OFF operation. If you
are not using the Remote ON/OFF pin, leave the pin open (the converter
will be on). The Remote ON/OFF pin is referenced to ground.
The following conditions apply for the SMT12F:
Configuration
Remote pin open circuit
Remote pin pulled low
Remote pin pulled high
Converter Operation
Unit is ON
Unit is ON
Unit is OFF
An ‘Active High’ Remote ON/OFF version is also possible with this
converter. To order please place the suffix ‘R’ towards the end of the part
number, e.g. SMT12F-05W3V3RJ.
2 See Figures 1 and 2 for sample derating curves. For the full set of
derating curves see Application Note 165.
3 A 22 µF ceramic input capacitor may be required for test purposes only.
See Application Note 165 for further details.
4 An external output capacitor is required for basic operation. Required
capacitance is a minimum of 110 µF to meet the performance
parameters. This can be made up of any combination of 22 µF or 44 µF
multi-layer ceramic capacitors in the appropriate voltage rating.
5 Ripple and Noise is worst case measurement. Typical value is 26 mV pk-
pk.
6 When Vin <4.5 V, Vout max = 2.5 V for model SMT12F-03W2V6.
7 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
8 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E174104
UL 60950 File No. E174104
TÜV Product Service (EN60950) Certificate No. B 04 04 38572 041.
CB Report and Certificate to IEC60950 DE3-52484
File Name: smt12f_05.pdf Rev (03): 16 Dec 2005
Share Link: 
