SPC5607BECLLR View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
MFG CO.
'SPC5607BECLLR' PDF : 92 Pages View PDF
Electrical characteristics
Table 7. Absolute maximum ratings (continued)
Symbol
Value
Parameter Conditions
Unit
Min
Max
IINJPAD
SR
Injected input
—
-10
10
mA
current on any
pin during
overload
condition
IINJSUM
SR
Absolute sum
—
-50
50
of all injected
input currents
during overload
condition
IAVGSEG
SR
Sum of all the VDD = 5.0 V ±
static I/O
10%, PAD3V5V
current within a = 0
supply
segment
VDD = 3.3 V ±
10%, PAD3V5V
=1
70
mA
64
TSTORAGE
SR
Storage
—
-55
150
°C
temperature
NOTE
Stresses exceeding the recommended absolute maximum ratings may cause permanent
damage to the device. This is a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the operational sections of this
specification are not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. During overload conditions (VIN > VDD or
VIN < VSS), the voltage on pins with respect to ground (VSS) must not exceed the
recommended values.
3.4 Recommended operating conditions
Table 8. Recommended operating conditions (3.3 V)
Symbol
Parameter
Conditions
VSS
VDD1
VSS_LV2
VDD_BV3
SR Digital ground on VSS_HV pins
—
SR Voltage on VDD_HV pins with respect
—
to ground (VSS)
SR Voltage on VSS_LV (low voltage digital
—
supply) pins with respect to ground
(VSS)
SR Voltage on VDD_BV pin (regulator
—
supply) with respect to ground (VSS) Relative to VDD
Value
Unit
Min Max
0
0
V
3.0
3.6 V
VSS−0.1 VSS+0.1 V
3.0
3.6 V
VDD−0.1 VDD+0.1
MPC5607B Microcontroller Data Sheet, Rev. 3
14
Freescale Semiconductor
Preliminary—Subject to Change Without Notice
Share Link: 
