SPMB250-A1EVAL View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
SPMB250-A1EVAL
STMicroelectronics
'SPMB250-A1EVAL' PDF : 16 Pages View PDF
UM0562
1
SPMB250-A1EVAL description
SPMB250-A1EVAL description
The SPMB250-A1EVAL (demonstration kit in the rest of the document) is a ready-to-use kit
designed as a platform for evaluating the capabilities of the SPMB250-A1 wireless sensor in
motion monitoring applications, where two sensor modules communicate with a remote
device over an 802.15.4 channel.
The kit includes two SPMB250-A1 modules and one ZigBee®-based dongle module.
This document describes:
● the modules contained in the demonstration kit
● the features of the software loaded in the demonstration kit modules
● the format of the packets at the serial output of the dongle when the software is used
The three different classes of demonstration kit users are:
● Demo users - The kit runs the demo using a simple tilt monitoring application. In this
case, the document provides guidelines on how to:
– network the modules together
– install the FTDI driver
– install and run the demo
● Developers of new PC applications - The software loaded in the sensors and dongle is
meant to be used without modifications and allows the development of PC applications
that can use up to 4 SPMB250-A1 modules together. In this case the document
provides guidelines on how to:
– network the modules together
– install the FTDI driver
● Developers of new application firmware - The new firmware must be loaded on the
modules by means of integrated SIF connectors. Instructions on application
development with the EmberZNet™ protocol stack and the use of Ember development
tools for the SN250 is beyond the scope of this document. The reader should refer to
the Ember documentation for details.
1.1
Demonstration kit contents
● 2 SPMB250-A1 acceleration sensor modules
● 1 ZigBee® -based dongle
● 2 battery holders
● 8 AA batteries
● 1 CD
Doc ID 14826 Rev 2
3/15
Share Link: 