SRTAG2K-D View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
SRTAG2K-D
STMicroelectronics
'SRTAG2K-D' PDF : 51 Pages View PDF
RF command sets
SRTAG2K-D
Table 44. R-APDU table of the EnablePermanentState command (continued)
Data
SW1
SW2
comment
Value
-
0x69
0x82
Security status not satisfied
Value
-
0x6A
0x80
CC file or System file selected
Value
-
0x6A
0x82
File or application not found
Value
-
0x6A
0x86
Incorrect P1 or P2 values
Value
-
0x6E
0x00
Class not supported
5.9
5.9.1
5.9.2
36/51
Specific RF command set
This section describes the command set that can be issued only by the RF host.
Anticollision command set
Table 45 lists the commands that can be issued only by the RF host. The format of these
commands is described in the NFC Forum Digital Protocol specification.
Table 45. Commands issues by the RF host
Family command set
Command name
ALL_REQ
SENS_REQ
Instruction code
0x52 (1)
0x26 (1)
NFC-A technology
SDD_REQ
0x93 or 0x95 or 0x97
SEL_REQ
0x93 or 0x95 or 0x97
SLP_REQ
0x50
1. Code on 7 bits.
RATS command and ATS response
RATS command and ATS response are used for NFC Forum Type 4A Tag Platform Device
Activation (as defined in NFC Forum Digital Protocol specification).
Table 46 details the RATS command. This command shall be sent after the anticollision
process.
Name
Byte field
Bit field
Instruction code
FSDI
DID (0 ≤DID ≤14)
2 CRC bytes
Table 46. RATS command
INS
Param
0xE0
1 byte
b7-b4
b3-b0
CRC
2 bytes
DocID025446 Rev 3
Share Link: 