ST7920-0C View Datasheet(PDF) - Sitronix Technology Co., Ltd.
Part Name
Description
MFG CO.
'ST7920-0C' PDF : 49 Pages View PDF
ST7920
Testing Step:
1. Clear whole DDRAM area by writing data 0x00.
2. Composing TT1 and TT2 to make the ‘Reset’ action, and clear the internal counter.
3. Selecting the test mode by setting TT1 and TT2 (CGROM or HCGROM).
4. After setp1 and setp2, entering some impulse signals through Pin4 (CLK).
5. Reading the CHECK SUM data through D0 to D7.
6. Comparing CHECK SUM with the Code Table (upper table) to check if the data is correct or not.
TT1 TT2 No. of counts Status
1
1
--
RESET
0
1
655362
CGROM
1
0
10242
HGROM
Test process flow:
V4.0
30/49
2008/08/18
Share Link: 
