ST7MDT2-EPB2 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

ST7MDT2-EPB2

A LOW-COST DEVELOPMENT PACKAGE INCLUDING A FULL REAL-TIME EMULATION BOARD

STMicroelectronics 

1 2 3 4 5 6 7 8 9 10 Next

ST7 EPB User Manual

1 - Introduction

1

INTRODUCTION

1.1

Overview

The ST7 EPB is a programming board kit which allows you to program ST7

microcontrollers having EPROM, EEPROM and FLASH memories.

Note:

Figure 1: Typical ST7_EPB programming board

The layout of the programming board included in your ST7 EPB kit varies

depending on the type and package of the ST7 microcontroller you wish to

program (a typical example is shown in Figure 1). However, the general

programming procedure explained in this book remains the same for all boards.

A complete listing of the ST7 family of programming boards, with a summary of the

devices they support is given in ST7_EPB.pdf , available on the MCU on CD CD-

ROM.

The ST7 EPB is meant to program small numbers of microcontrollers (i.e. prototypes in the

development stage). For mass production programming, it is recommended that you use the

appropriate gang programmer.

The programming board is linked via the parallel port, to a host PC running the

Windows Epromer software (WINEE). This software interface allows you to

customize and control the programming.

5/20

Share Link: