STG3384
3
Maximum rating
Maximum rating
stressing the device above the rating listed in the “absolute maximum ratings” table may
cause permanent damage to the device. these are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. exposure to absolute maximum rating conditions for
extended periods may affect device reliability. refer also to the STMicroelectronics sure
program and other relevant quality documents.
Table 3. Absolute maximum ratings
Symbol
Parameter
VCC Supply voltage
VI DC input voltage
VIC DC control input voltage
VO DC output voltage
IIKC DC Input diode current on control pin (VIN < 0V)
IIK
IOK
IO
IOP
ICC or
IGND
PD
DC input diode current (VIN < 0V)
DC output diode current
DC output current
DC output current peak (pulse at 1ms, 10% duty cycle)
DC VCC or ground current
Power dissipation at TA = 70°C(1)
Tstg Storage temperature
TL Lead temperature (10 sec)
1. Derate above 70C by 18.5mW/C
Value
Unit
-0.5 to 5.5
V
-0.5 to VCC + 0.5
V
-0.5 to 5.5
V
-0.5 to VCC + 0.5
V
-50
mA
±50
mA
±20
mA
±200
mA
±400
mA
±100
mA
1120
mW
-65 to 150
°C
300
°C
3.1
Recommended operating conditions
Table 4. Recommended operating conditions
Symbol
Parameter
VCC Supply voltage (1)
VI
VIC
VO
Top
dt/dv
Input voltage
Control input voltage
Output voltage
Operating temperature
VCC = 1.65V to 2.7V
Input rise and fall time control input
VCC = 3.0 to 4.3V
1. Truth table guaranteed: 1.5V to 3.6V
Value
1.4 to 4.3
0 to VCC
0 to 4.3
0 to VCC
-55 to 125
0 to 20
0 to 10
Unit
V
V
V
V
°C
ns/V
5/12