STM8S105S6B6CTR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

STM8S105S6B6CTR

Access line, 16 MHz STM8S 8-bit MCU, up to 32 Kbyte Flash, integrated EEPROM, 10-bit ADC, timers, UART, SPI, I²C

STMicroelectronics 

Prev 91 92 93 94 95 96 97 98 99 100 Next

STM8S105xx

Electrical characteristics

Figure 39: Typical NRST pull-up current vs VDD @ 4 temperatures

The reset network shown inthe following figure protects the device against parasitic resets.

The user must ensure that the level on the NRST pin can go below the VIL max. level specified

in the I/O port pin characteristics section. Otherwise the reset is not taken into account

internally.

Figure 40: Recommended reset pin protection

External

reset

circuit

(optional)

VDD

NRST

0.01 μF

RPU

STM8

Filter

Internal reset

10.3.9

SPI serial peripheral interface

Unless otherwise specified, the parameters given in the following table are derived from tests

performed under ambient temperature, fMASTER frequency and VDD supply voltage conditions.

tMASTER = 1/fMASTER.

Refer to I/O port characteristics for more details on the input/output alternate function

characteristics (NSS, SCK, MOSI, MISO).

DocID14771 Rev 9

93/127

Share Link: