STPCC03 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'STPCC03' PDF : 51 Pages View PDF
STRAP OPTIONS
3.1.3 486 CLOCK PROGRAMMING (486_CLK)
The bit MD[40] is used to set the clock multiplication factor of the 486 core. With the MD[40] pin pulled low
the 486 will run in DX (x1) mode, while with the MD[40] pin pulled high the 486 will run in DX2 (x2) mode.
The default value of the resistor on this strap input should be a resister to gnd (DX mode).
Strap Options [43:41] and [39:27] are reserved.
Release B
This is preliminary information on a new product now in developement. Details are subject to change without notice
27/51
Share Link: 
