STV-366-R01 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'STV-366-R01' PDF : 30 Pages View PDF
VT5366
Operation
Table 13. Reg [#0x2F]: Minimum Motion Search Vector
Add
Bits
Name
R/W
Default
0x2F
[7:0] Minimum search vector
R/W
0001_0000
Description
0x40 - increase sensitivity when
going into non-run mode
0x10 - default setting in run
mode
Table 14. Reg [#0x31 - 0x32]: Surface Feature Report
Add
Bits
Name
R/W
0x31 [15:8]
Features count
RO
0x32
[7:0]
Default
Description
Current field feature count report
Table 15. Reg [#0x40 - 0x41]: Exposure Setting
Add
Bits
Name
R/W
0x40
[1:0] Exposure [9:8]
R/W
0x41
[7:0] Exposure [7:0]
Default
0x01ff
Description
Exposure value in CLK12
periods units.
Default is 511.-
Table 16. Reg [#0x43]: AutoExposure Enable
Add
Bits
Name
R/W
0x43
[4] AEC enable
RW
Default
1
Description
Enable auto exposure
Table 17. Reg [#0x47]: ADC data
Add
Bits
Name
0x47
[7:0] ADC_IN converted data
R/W
Default
Description
This register holds the current
converted data from the ADC_IN
analog input pin.
The data range is as follows:
RO
0000_0000 0000_0000: ADC_IN = 0.6V
1111_1111: ADC_IN = 1.6V
The response is linear for each
value in between, ADC steps are
1V/256 = 3.9mV.
Table 18. Reg [#0x4F]: Exposed image Max reported value
Add
Bits
Name
R/W
Default
Description
0x4F
[7:0] Exp max value
This registers holds the
maximum pixel value (before
CDS) for the current frame. It
RO
0000_0000 shows if some
pixels are saturated or not. This
register should be used as the
AEC metric.
15/30
Share Link: 
