TDA7402_00 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'TDA7402_00' PDF : 59 Pages View PDF
Figure 28. Internal stereoblend characteristics
TDA7402
The gain can be programmed through 4 bits in the ”Stereodecoder-Adjustment”-byte. All necessary internal ref-
erence voltages like REF5V are derived from a bandgap circuit. Therefore they have a temperature coefficient
near zero.
Figure 29. Relation between internal and external LEVEL-voltages for setup of Stereoblend
70
20
3.9 Highcut Control
The highcut control set-up is similar to the stereoblend control set-up : the starting point VHCH can be set with
2 bits to be 42, 50, 58 or 66% of REF5V whereas the range can be set to be 17, 22, 28 or 33% of VHCH (see
fig. 30).
Figure 30. Highcut characteristics
35/59
Share Link: 
