TDA7404 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'TDA7404' PDF : 35 Pages View PDF
Description of functionality
TDA7404
4.4.3
Low and high frequency boost
Figure 7 shows the different Loudness-shapes in low & high frequency boost.
Figure 7. Loudness attenuation, fC = 2.4 kHz
5
0
-5
-10
-15
-20
10
100
1K
10K
4.5
Soft-mute
The digitally controlled soft-mute stage allows muting/demuting the signal with a I2C bus
programmable slope. The mute process can either be activated by the Mute pin or by the
I2C bus. This slope is realized in a special S-shaped curve to mute slow in the critical
regions (seeFigure 6).
For timing purposes the Bit 0 of the I2C bus output register is set to 1 from the start of muting
until the end of de-muting.
Figure 8. Soft-mute timing
1. Please notice that a started Mute-action is always terminated and could not be interrupted by a change of
the mute -signal.
16/35
Share Link: 
