TDA9115 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'TDA9115' PDF : 45 Pages View PDF
Revision follow-up
PRODUCT PREVIEW
June 2000
version 2.0
Document created (issued from TDA9112)
Work on figures and text; version finalized and displayed on Intranet.
July 2000
version 2.1
Sentence modified in first page : The internal sync processor.;.” replaced by :”the device only requires..;”
Bloc diagram : addition of Hsize under E/W correction
Quick Reference Data: Addition of parrallelogram
Register Map: subaddress 08: 0:No tracking
Few corrections in text.
PRELIMINARY DATA
September 2000
version 3:0
Uniformity in the writing of cross references for notes.
In internal schematics, correction of figure for pin 11.
In bloc diagram: the line between PLL2 and HMoiré controller has been deleted
In Horizontal Moiré Cancellation: 1 sentence changed
VDC AMP replaced by VDC-AMP
In electrical parameters:
∆VHMoiré becomes ∆VAC-HMoiré
Addition of VDC-HMoiré,.
January 11, 2001
version 3.1
page 6: value for autosync frequency ratio replaced : 4.28 instead of 4.5 previously.
April 19, 2001
version 3.2
page 16
Section 6.9 .Vtrh-XRay: new values 7.65 min, 7.9 typ., 8.2 max.
DATASHEET
July 18, 2001
version 4.0
Section 9.4.1 right column”The higher its value,...” ---> ”The lower its value”
Section 9.5 .”...at the vertical middle...” ---> ”...in the vertical middle...”
Section 6.6 : addition of [fmax] to parameter ”∆VEW/VEW[fmax].∆VHO” .and changed its
value to 20
Note 28: added: “VEW[fmax] is the value at condition VHO>VHOThrfr”.
Section 6.4 : addition of min and max values for VHPosF and VTopHPLL2C
Section 6.5 addition of min and max values for VVOB + correction of typ. value
2
Share Link: 
