TS321AIYD View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'TS321AIYD' PDF : 12 Pages View PDF
TS321
Electrical Characteristics
Table 2.
Symbol
Vcc+ = +5V, Vcc- = Ground, Vo = 1.4V, Tamb = +25°C (unless otherwise specified)
Parameter
Conditions
Min. Typ. Max. Unit
SR
GBP
φm
Slew Rate
Gain Bandwith Product
Phase Margin
VCC = +15V, Vi = 0.5 to 3V, RL = 2kΩ,
CL = 100pF, Tamb = +25°C, unity gain
VCC = 30V, f = 100kHz, Tamb = +25°C,
Vin = 10mV, RL = 2kΩ, CL = 100pF
0.4
V/µs
0.8
MHz
60
Degrees
THD
Total Harmonic
Distortion
f = 1kHz, AV = 20dB, RL = 2kΩ, Vo = 2Vpp,
CL = 100pF, Tamb = +25°C, VCC = 30V
0.015
%
en
Equivalent Input Noise
Voltage
f = 1kHz, Rs = 100Ω, VCC = 30V
40
---n---V-----
Hz
1. Vo = 1.4V, Rs = 0W, 5V < VCC+ < 30V, 0 < Vic < VCC+ - 1.5V
2. The direction of the input current is out of the IC. This current is essentially constant, independent of the state of the output
so no loading change exists on the input lines.
3. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V.
The upper end of the common-mode voltage range is VCC+ - 1.5V, but either or both inputs can go to +32V without
damage.
5/12
Share Link: 
