TS616IDW View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'TS616IDW' PDF : 37 Pages View PDF
Absolute maximum ratings and operating conditions
TS616
2
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
VCC
Vid
Vin
Toper
Tstd
Tj
Rthjc
Rthja
Pmax
ESD
only pins
1, 4, 7, 8
ESD
only pins
2, 3, 5, 6
Supply voltage (1)
Differential input voltage (2)
Input voltage range (3)
Operating free air temperature range
Storage temperature
Maximum junction temperature
Thermal resistance junction to case
Thermal resistance junction to ambient area
Maximum power dissipation (at Tamb = 25° C) for
Tj = 150° C
HBM: human body model(4)
MM: machine model(5)
CDM: charged device model(6)
HBM: human body model(4)
MM: machine model(5)
CDM: charged device model(6)
Output short circuit
Value
±7
±2
±6
-40 to + 85
-65 to +150
150
16
60
2
1.5
2
200
1.5
2
100
(7)
Unit
V
V
V
°C
°C
°C
°C/W
°C/W
W
kV
kV
V
kV
kV
V
1. All voltage values, except differential voltage are with respect to network terminal.
2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltage must never exceed VCC +0.3 V.
4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
6. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
7. An output current limitation protects the circuit from transient currents. Short-circuits can cause excessive
heating. Destructive dissipation can result from short-circuits on amplifiers.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Power supply voltage
Vicm
Common mode input voltage
±2.5 to ±6
V
-VCC+1.5 V to +VCC-1.5 V
V
4/37
Share Link: 
