Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TTL-232RG-VSW3V3-WE View Datasheet(PDF) - Future Technology

Part Name
Description
MFG CO.
TTL-232RG-VSW3V3-WE
FTDI
Future Technology FTDI
'TTL-232RG-VSW3V3-WE' PDF : 18 Pages View PDF
Prev 11 12 13 14 15 16 17 18
Document Reference No.: FT_000188
TTL TO USB SERIAL CONVERTER GENERIC CABLES Datasheet
Version 1.4
Clearance No.: FTDI# 129
Appendix A - Cable EEPROM Configuration
Each TTL-232RG cable is controlled by the FTDI FT232R IC. This FT232R device contains an EEPROM
which contains the USB configuration descriptors for that device. When the cable is plugged into a PC or a
USB reset is performed, the PC will read these descriptors. The default values stored into the internal
EEPROM are defined in the following table
Parameter
Value
Notes
USB Vendor ID (VID)
0403h
FTDI default VID (hex)
USB Product UD (PID)
6001h
FTDI default PID (hex)
Serial Number Enabled?
Serial Number
Pull down I/O Pins in USB
Suspend
Yes
See Note
Disabled
A unique serial number is generated and programmed into
the EEPROM during device final test.
Enabling this option will make the device pull down on the
UART interface lines when the power is shut off (PWREN#
is high).
Manufacturer Name
FTDI
Product description depends on the cable. The following
lists a few of the Product description for each different
cable.
Product Description
See note
TTL-232RG-VSW3V3
TTL-232RG-VREG3V3
TTL-232RG-VREG1V8
TTL-232RG-VREGxVx
TTL-232RG-VIP
Max Bus Power Current
90mA
Power Source
Bus Powered
Device Type
USB Version
Remote Wake Up
High Current I/Os
Load VCP Driver
Invert TXD
Invert RXD
Invert RTS#
Invert CTS#
FT232R
0200
Returns USB 2.0 device description to the host.
Note: The device is a USB 2.0 Full Speed device (12Mb/s).
Disabled
Enabled
Enabled
500uA suspend limit when in this state
Enables the high drive level on the UART and CBUS I/O
pins.
Makes the device load the VCP driver interface for the
device.
Disabled
Signal on this pin becomes TXD# if enable.
Disabled
Signal on this pin becomes RXD# if enable.
Disabled
Signal on this pin becomes RTS if enable.
Disabled
Signal on this pin becomes CTS if enable.
Default Internal EEPROM Configuration
Copyright © Future Technology Devices International Limited
14
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]