USB2512BI/M2 View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'USB2512BI/M2' PDF : 57 Pages View PDF
USB251xB/xBi
5.1.8 REGISTER 07H: CONFIGURATION DATA BYTE 2
Bit Number
7
6
5:4
3
2:0
Bit Name
DYNAMIC
rsvd
OC_TIMER
COMPOUND
rsvd
Description
Dynamic Power Enable: controls the ability of the hub to automatically change
from self-powered to bus-powered operation if the local power source is
removed or unavailable. It can also go from bus-powered to self-powered
operation if the local power source is restored.
When dynamic power switching is enabled, the hub detects the availability of
a local power source by monitoring LOCAL_PWR. If the hub detects a change
in power source availability, the hub immediately disconnects and removes
power from all downstream devices. It also disconnects the upstream port.
The hub will then re-attach to the upstream port as either a bus-powered hub
(if local power is unavailable) or a self-powered hub (if local power is
available).
0 : no dynamic auto-switching
1 : dynamic auto-switching capable
Over Current Timer Delay:
00 : 0.1 ms
01 : 4.0 ms
10 : 8.0 ms
11 : 16.0 ms
Compound Device: indicates the hub is part of a compound device (see the
USB Specification for definition). The applicable port(s) must also be defined
as having a non-removable device.
Note: When configured via strapping options, declaring a port as non-
removable automatically causes the hub controller to report that it is
part of a compound device.
0 : no
1 : yes, the hub is part of a compound device
5.1.9 REGISTER 08H: CONFIGURATION DATA BYTE 3
Bit Number
7:4
3
2:1
0
Bit Name
rsvd
PRTMAP_EN
rsvd
STRING_EN
Description
Port Mapping Enable: selects the method used by the hub to assign port
numbers and disable ports.
0 : standard mode
1 : port mapping mode
Enables String Descriptor Support
0 : string support disabled
1 : string support enabled
2010 - 2015 Microchip Technology Inc.
DS00001692C-page 23
Share Link: 
