VIPER53EDIP-E View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'VIPER53EDIP-E' PDF : 31 Pages View PDF
Special Recommendations
11 Special Recommendations
VIPer53EDIP - E / VIPer53ESP - E
Note:
10nF capacitor (minimum value: 8nF) should always be connected to the COMP pin to
ensure correct stability of the internal current source Figure 12 on page 22.
In order to improve the ruggedness of the device versus eventual drain overvoltages, a
resistance of 1kΩ should be inserted in series with the TOVL pin, as shown on Figure 12 on
page 22
This resistance does not impact the overload delay, as its value is negligible prior to the
internal pull-up resistance (about 125kΩ).
18/31
DocRev1
Share Link: 
