WM8768GEDS/RV View Datasheet(PDF) - Cirrus Logic
Part Name
Description
MFG CO.
'WM8768GEDS/RV' PDF : 38 Pages View PDF
WM8768
Production Data
MUTE PIN AS INPUT
The WM8768 can be muted externally by driving the MUTE pin high. When the MUTE pin is driven
low the device will never automute, although direct mutes can still be applied via the DMUTE or
MUTEALL registers.
The DZFM bits are used to decode the operation of a MUTE pin (decides which channels will be
affected by the logic level present on the MUTE pin). MPD (Mute Pin Decode) is used to enable the
DZFM operation. If MPD is set, the selection made by the DZFM bits will be ignored and all channels
will be muted when the pin is driven high.
Table 11 below describes which channels will be softmuted when the MUTE pin is driven high
depending on the MPD and DZFM bits.
MPD
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
{DZFM4,DZFM [1:0]}
000
001
010
011
100
101
110
111
000
001
010
011
100
101
110
111
CHANNELS MUTED WHEN
MUTE PIN HIGH
All Channels
CH1
CH2
CH3
CH4
CH1 and CH2
CH1, CH2 and CH3
CH3 and CH4
All Channels
All Channels
All Channels
All Channels
All Channels
All Channels
All Channels
All Channels
Table 11 Mute Pin Decode when Mute Pin as Input
w
PD Rev 4.3 July 2010
26
Share Link: 
