WM8772SEDS/RV View Datasheet(PDF) - Cirrus Logic
Part Name
Description
MFG CO.
'WM8772SEDS/RV' PDF : 73 Pages View PDF
Production Data
WM8772EDS – 28 LEAD SSOP
POWERDOWN MODE AND ADC/DAC DISABLE
Setting the PDWN register bit immediately powers down the DAC’s on the WM8772EDS, overriding
the DACD powerdown bits control bits. All trace of the previous input samples are removed, but all
control register settings are preserved. When PDWN is cleared the digital filters will be reinitialised
REGISTER ADDRESS BIT
0000010
2
Powerdown Control
LABEL
PDWN
DEFAULT
0
DESCRIPTION
Power Down all DAC’s Select:
0: All DAC’s enabled
1: All DAC’s disabled
The ADC and DACs may also be powered down individually by setting the ADCPD and DACPD
disable bits. Setting ADCD will disable the ADC and select a low power mode. The ADC digital filters
will be reset and will reinitialise when ADCPD is unset. Each Stereo DAC channel has a separate
disable DACPD[2:0]. Setting DACPD for a channel will disable the DACs and select a low power
mode.
REGISTER ADDRESS
0001010
Powerdown Control
BIT LABEL DEFAULT
0
ADCPD
0
3:1 DACPD[2:0]
000
DESCRIPTION
ADC Disable:
0: Active
1: Disable
DAC Disable
DACPD [2:0]
000
001
010
011
100
101
110
111
DAC CHANNEL 1
Active
DISABLE
Active
DISABLE
Active
DISABLE
Active
DISABLE
DAC CHANNEL 2
Active
Active
DISABLE
DISABLE
Active
Active
DISABLE
DISABLE
DAC CHANNEL 3
Active
Active
Active
Active
DISABLE
DISABLE
DISABLE
DISABLE
MASTER POWERDOWN
This control bit powers down the references for the whole chop. Therefore for complete powerdown,
both the ADC and DACs should be powered down first before setting this bit.
REGISTER ADDRESS
0001010
Interface Control
BIT LABEL DEFAULT
4 PWRDNALL
0
DESCRIPTION
Master Power Down Bit:
0: Not powered down
1: Powered down
MASTER MODE SELECT
Control bit MS selects between audio interface Master and Slave Modes. In Master mode LRC and
BCLK are outputs and are generated by the WM8772EDS. In Slave mode LRC and BCLK are inputs
to WM8772EDS.
REGISTER ADDRESS BIT
0001010
5
Interface Control
LABEL
MS
DEFAULT
0
DESCRIPTION
DAC Audio Interface Master/Slave
Mode Select:
0: Slave mode
1: Master mode
w
PD Rev 4.2 October 2005
35
Share Link: 
