WT21 View Datasheet(PDF) - Unspecified
Part Name
Description
MFG CO.
'WT21' PDF : 54 Pages View PDF
Table 11: Standard Baud Rates
6.2.1 UART Configuration While Reset is Active
The UART interface for WT21 is tri-state while the chip is being held in reset. This allows the
user to daisy chain devices onto the physical UART bus. The constraint on this method is that
any devices connected to this bus must tri-state when WT21 reset is de-asserted and the
firmware begins to run.
Bluegiga Technologies Oy
Page 22 of 56
Share Link: 
