XE3314C View Datasheet(PDF) - Xecom
Part Name
Description
MFG CO.
'XE3314C' PDF : 16 Pages View PDF
XE3314C Modem Registers (continued)
S86 Call Failure Code: S86 shows why the last "NO CAR-
RIER response was issued.
S86=0 Normal disconnect
S86=3 Call Waiting caused disconnect
S86=4 Loss of Carrier
S86=5 Error Correction negotiation failure
S86=6 No response to feature negotiation
S86=7 The other modem was synchronous
S86=8 No common framing technique
S86=9 No common modem protocol
S86=10 Bad response to feature negotiation
S86=12 Disconnect initiated by remote modem
S86=13 No response after 10 retries
S86=14 Protocol violation
S86=15 DTR deactvated by host
S86=16 Received GSTN cleardown
S86=17 Inactivity timeout
S86=18 Data Rate not supported
S86=19 Long Space Disconnect
S86=20 Key abort disconnect
S86=21 Clear previous disconnect cause
S86=22 No Connection established
S86=23 Disconnect after 3 retrains
S86=24 Call Waiting tone detected
S86=25 Extension pickup detected
S86=26 Remote hang-up detected
S95 Extended Result Codes: S95 permits the user to cus-
tomize the extended result codes.
Bit 0 Connect result code shows link speed
Bit 1 Add /ARQ to connect response
Bit 2 Add /VFC to Carrier response
Bit 3 Enable Protocol response
Bit 4 Not Used
Bit 5 Enable Compression Result Code
Bit 6 Not used
Bit 7 Not Used
XE3314C Class 1 Fax Commands
AT+FCLASS? - Service Class Indication
0 = Configured as a data modem
1 = Configured for Service Class 1.
AT+FCLASS=? - Service Class Capability
0 = Configured as a data modem
1 = Configured for Service Class 1.
AT+FCLASS=n - Set Service Class
0 = Configured as a data modem
1 = Configured for Service Class 1.
AT+FAE=n - Data/Fax Auto Answer
0 = Answer as a fax modem only
1 = Either a fax or data modem
AT+FF - Enhanced Flow Control
AT+FRH<mod> - Receive HDLC Data
3
V.21 Channel 2, 300 bps
24 V.27ter, 2400 bps
48 V.27ter, 4800 bps
72 V.29, 7200 bps
96 V.29, 9600 bps
97 V.17, 9600 bps
98 V.17 short train, 9600 bps
121 V.17, 12,000 bps
122 V.17 short train, 12,000 bps
145 V.17, 14,400 bps
146 V.17 short train, 14,400 bps
AT+FRM<mod> - Receive Fax
(see AT+FRH for "mod" values)
AT+FRS<time> - Receive Silence
AT+FRTn - Receive Test Data
AT+FTH<mod> - Transmit HDLC Data
(see AT+FRH for "mod" values)
AT+FTM<mod> - Transmit Fax
(see AT+FRH for "mod" values)
AT+FTS<time> - Transmit Silence
AT+FTTn - Transmit Test Data
XECOM
(15)
XE3314C
Share Link: 
