Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

XRT75L02 View Datasheet(PDF) - Exar Corporation

Part Name
Description
MFG CO.
'XRT75L02' PDF : 50 Pages View PDF
1 2 3 4 5 6 7 8 9 10 Next
XRT75L02
TWO CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER
xr
REV. 1.0.3
FIGURE 1. BLOCK DIAGRAM OF THE XRT 75L02
SDI
SDO
INT
SClk
CS
RESET
HOST/HW
STS-1/DS3
E3
REQEN
RTIP
RRING
SR/DR
LLB
TTIP
TRING
MTIP
MRING
DMO
Serial
Processor
Interface
XRT75L03
Peak Detector
AGC/
Equalizer
Slicer
Local
LoopBack
Clock & Data
Recovery
LOS
Detector
Clock
Synthesizer
Jitter
MUX
Attenuator
Remote
LoopBack
Invert
HDB3/
B3ZS
Decoder
Line
Driver
Device
Monitor
Tx
Pulse
Shaping
Tx
Control
Timing
Control
Jitter
Attenuator
MUX
HDB3/
B3ZS
Encoder
CLK_OUT
E3Clk,DS3Clk,
STS-1Clk
RLOL
RxON
RxClkINV
RxClk
RPOS
RNEG/
LCV
RLB
RLOS
JATx/Rx
TPOS
TNEG
TxClk
TAOS
TxLEV
TxON
Note: Serial Processor Interface input pins are shared by in "Host" Mode and redefined in the "Hardware" Mode.
TRANSMIT INTERFACE CHARACTERISTICS
Accepts either Single-Rail or Dual-Rail data from Terminal Equipment and generates a bipolar signal to the
line
Integrated Pulse Shaping Circuit.
Built-in B3ZS/HDB3 Encoder (which can be disabled).
Accepts Transmit Clock with duty cycle of 30%-70%.
Generates pulses that comply with the ITU-T G.703 pulse template for E3 applications.
Generates pulses that comply with the DSX-3 pulse template, as specified in Bellcore GR-499-CORE and
ANSI T1.102_1993.
Generates pulses that comply with the STSX-1 pulse template, as specified in Bellcore GR-253-CORE.
Transmitter can be turned off in order to support redundancy designs.
RECEIVE INTERFACE CHARACTERISTICS
Integrated Adaptive Receive Equalization for optimal Clock and Data Recovery.
Declares and Clears the LOS defect per ITU-T G.775 requirements for E3 and DS3 applications.
Meets Jitter Tolerance Requirements, as specified in ITU-T G.823_1993 for E3 Applications.
Meets Jitter Tolerance Requirements, as specified in Bellcore GR-499-CORE for DS3 Applications.
Declares Loss of Signal (LOS) and Loss of Lock (LOL) Alarms.
Built-in B3ZS/HDB3 Decoder (which can be disabled).
2
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]