ACPL-332J-500E Datasheet PDF - Avago Technologies

Description
The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open collector fault feedback and active Miller clamping
provide maximum design flexibility and circuit protection.

FEATUREs
•  Under Voltage Lock-Out Protection (UVLO) with Hysteresis
•  Desaturation Detection
•  Miller Clamping
•  Open Collector Isolated fault feedback
• “Soft” IGBT Turn-off
•  Fault Reset by next LED turn-on (low to high) after fault mute period
•  Available in SO-16 package
•  Safety approvals: UL approved, 3750 VRMS for 1 minute, CSA approved, IEC/EN/DIN-EN 60747-5-2 approved VIORM = 891 VPEAK

Specifications
•  2.5 A maximum peak output current
•  2.0 A minimum peak output current
•  250 ns maximum propagation delay over temperature range
•  100 ns maximum pulse width distortion (PWD)
•  15 kV/µs minimum common mode rejection (CMR) at VCM = 1500 V
•  ICC(max) < 5 mA maximum supply current
•  Wide VCC operating range: 15 V to 30 V over temperature range
•  1.7 A Miller Clamp. Clamp pin short to VEE if not used
•  Wide operating temperature range: –40°C to 105°C

APPLICATIONs
•  Isolated IGBT/Power MOSFET gate drive
•  AC and brushless DC motor drives
•  Industrial inverters and Uninterruptible Power Supply(UPS)