AD5930(RevB) Datasheet PDF - Analog Devices

GENERAL DESCRIPTION
The AD59301 is a waveform generator with programmable frequency sweep and output burst capability. Utilizing embedded digital processing that allows enhanced frequency control, the device generates synthesized analog or digital frequency-stepped waveforms. Because frequency profiles are preprogrammed, continuous write cycles are eliminated and thereby free up valuable DSP/μcontroller resources. Waveforms start from a known phase and are incremented phase continuously, which allows phase shifts to be easily determined. Consuming only 8 mA, the AD5930 provides a convenient low power solution to waveform generation.

FEATURES
   Programmable frequency profile
      No external components necessary
   Output frequency up to 25 MHz
   Burst and listen capability
   Preprogrammable frequency profile minimizes number of
      DSP/μcontroller writes
   Sinusoidal/triangular/square wave outputs
   Automatic or single pin control of frequency stepping
   Waveform starts at known phase
      Increments at 0° phase or phase continuously
   Power-down mode: 20 μA
   Power supply: 2.3 V to 5.5 V
   Automotive temperature range: −40°C to +125°C
   20-lead pb-free TSSOP
  
APPLICATIONS
   Frequency sweeping/radar
   Network/impedance measurements
   Incremental frequency stimulus
   Sensory applications
      Proximity and motion
   BFSK
   Frequency bursting/pulse trains