ADC1005S060TS Datasheet PDF - Integrated Device Technology

General description
The ADC1005S060 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary or gray coded digital words at a maximum sampling rate of 60 MHz. All digital inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although a low-level sine wave clock input signal is allowed.
The device requires an external source to drive its reference ladder.

FEATUREs
■ 10-bit resolution (binary or gray code)
■ Sampling rate up to 60 MHz
■ DC sampling allowed
■ One clock cycle conversion only
■ High signal-to-noise ratio over a large analog input frequency range (9.3 effective bits at 5 MHz full-scale input at fclk = 60 MHz)
■ No missing codes guaranteed
■ In-Range (IR) CMOS output
■ TTL and CMOS levels compatible digital inputs
■ 2.7 V to 3.6 V CMOS digital outputs
■ Low-level AC clock input signal allowed
■ External reference voltage regulator
■ Power dissipation only 312 mW (typical)
■ Low analog input capacitance, no buffer amplifier required
■ No sample-and-hold circuit required

APPLICATIONs
■ Video data digitizing
■ Radar
■ Barcode scanners
■ Digital instrumentation
■ Transient signal analysis
■ Σ∆ modulators
■ Medical imaging