AM28F010A-70FIB Datasheet PDF - Advanced Micro Devices

GENERAL DESCRIPTION
The Am28F010A is a 1 Megabit Flash memory organized as 128 Kbytes of 8 bits each. AMD’s Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The Am28F010A is packaged in 32-pin PDIP, PLCC, and TSOP versions. It is designed to be reprogrammed and erased in-system or in standard EPROM programmers. The Am28F010A is erased when shipped from the factory.

DISTINCTIVE CHARACTERISTICS
■High performance
— Access times as fast as 70 ns
■CMOS low power consumption
— 30 mA maximum active current
— 100 µA maximum standby current
— No data retention power consumption
■Compatible with JEDEC-standard byte-wide
32-pin EPROM pinouts
— 32-pin PDIP
— 32-pin PLCC
— 32-pin TSOP
■100,000 write/erase cycles minimum
■Write and erase voltage 12.0 V ±5%
■Latch-up protected to 100 mA from
–1 V to VCC+1 V
■Embedded Erase Electrical Bulk Chip Erase
— 5 seconds typical chip erase, including
pre-programming
■Embedded Program
— 14 µs typical byte program, including time-out
— 4 seconds typical chip program
■Command register architecture for microprocessor/microcontroller compatible write interface
■On-chip address and data latches
■Advanced CMOS flash memory technology
— Low cost single transistor memory cell
■Embedded algorithms for completely self-timed write/erase operations