AN2063 Datasheet PDF - STMicroelectronics

Introduction
The new regulation on the power supply standby consumption for the battery charger is more and more stringent. Thanks to the VIPerx2A family low power consumption, a battery charger can be built in standby mode with no-load of 100 mW. This charger solution with the VIPer12A-E is presented in Table 1.

Some general features:
• Ultra low standby power dissipation
• Burst mode operation in standby
• 72% typical efficiency
• Current mode controller
• Output short-circuit protection
• Thermal shutdown protection

Description
The VIPer12A-E is a high voltage integrated circuit intended to be used as a primary side switch on the offline power supply, in a monolithic structure housed in DIP8 or SO- 8 package. It includes a PWM driver, a power MOSFET with 730 V breakdown voltage, a start-up circuit and several protection circuits. It minimizes the count of external parts, reduces the product size and power consumption. This application note describes the results obtained when the VIPer12A-E is used in mobile charger applications.