Description
The AP2953A is a monolithic synchronous buck regulator. The device integrates 100mΩ MOSFETS that provide 3A continuous load current over a wide operating input voltage of 4.75V to 18V. Current mode control provides fast transient response and cycle-by-cycle current limit.
An adjustable soft-start prevents inrush current at turn-on. In shutdown mode, the supply current drops below 1μA.
This device, available in an 8-pin SOP package, provides a very compact system solution with minimal reliance on external components.
FEATUREs
● 3A Output Current
● Wide 4.75V to 18V Operating Input Range
● Integrated 100mΩ Power MOSFET Switches
● Output Adjustable from 0.925V to 15V
● Up to 95% Efficiency
● Programmable Soft-Start
● Stable with Low ESR Ceramic Output Capacitors
● Fixed 370KHz Frequency
● Cycle-by-Cycle Over Current Protection
● Input Under Voltage Lockout
● Thermally Enhanced 8-Pin SOP Package
APPLICATIONs
● Distributed Power Systems
● Networking Systems
● FPGA, DSP, ASIC Power Supplies
● Green Electronics/ Appliances
● Notebook Computers