AS8F2M32 Datasheet PDF - Micross Components

GENERAL DESCRIPTION
   The AS8F2M32 is a 64 Mbit, 5.0 volt-only Flash memory. This device is designed to be programmed in-system with the standard system 5.0 volt VCC supply. The AS8F2M32 offers an access time of 90ns, allowing high-speed microprocessors to operate without wait states. To eliminate bus contention, the device has separate chip enable (CE), write enable (WE) and output enable (OE) controls.

FEATURES
• Fast access times of 90ns, 120ns, and 150ns
• 5.0V ±10%, single power supply operation
• Low power consumption(TYP): 4μA CMOS stand-by
   * TYP ICC(active) <120mA for READ/WRITE
• 20 year DATA RETENTION
• Minimum 1,000,000 Program/Erase Cycles per sector
   guaranteed
• 32 equal sectors of 64 Kbytes each
• Any combination of Sectors can be Erased
• Group Sector Protection
• Supports FULL Chip Erase
• Compatible with JEDEC standards
• Embedded Erase and Program Algorithms
• Data Polling and Toggle bits for detection of program or erase
   cycle completion.
• Erase Suspend/Resume
• Hardware Reset pin (RESET)
• Built in Decoupling Caps and Multiple Ground Pins for Low
   Noise Operation
• Separate Power and Ground Planes to improve noise immunity