ATWILC1000(2015) Datasheet PDF - Atmel Corporation

Introduction

   This user guide describes how to integrate the Atmel® ATWILC1000 and work Wi-Fi on the Atmel MCU platform. Useful information of Atmel MCU is already described in Atmel for SAM website and GitHub for the relevant source code.

   In Linux® case, this user guide is based on SAMA5D3 Xplained board and explains the programing in chapters 1 to 6. For the SAMA5D3 Linux platform, there a lot of useful information is already described in Atmel Linux for SAM website. The relevant source codes are maintained on GitHub. It is highly recommended the user to visit those sites. Refer to chapters 1 to 6.

Prerequisites

• Hardware Prerequisites

   – Linux

      • Atmel SAMA5D3 Xplained Evaluation Kit

      • Atmel ATWILC1000 SD Pro Card

      • USB to Serial Adaptor (for DBGU port)

   – Android

      • Atmel SAMA5D3-EK Evaluation Kit

      • Atmel ATWILC1000 SD Pro Card

      • USB to Serial Adaptor (for DBGU port)

   – Non-OS

      • Atmel SAMG53 Xplained Pro Kit

      • Atmel ATWILC1000-XPRO Wi-Fi Extension Board

   – Common

      • Micro-USB Cable (Micro-A / Micro-B)

• Build Prerequisites

   – Linux and Android

      • Linux Host PC

      • Linux and Android Software Package

   – Non-OS

      • Atmel Studio