ATZB-S1-256-3-0-C Datasheet PDF - Atmel Corporation

Part Name

ATZB-S1-256-3-0-C

Description

ZigBit 2.4GHz Single chip Wireless Module

Other PDF

  no available.

PDF

DOWNLOAD     

page

27 Pages

File Size

1.1 MB

MFG CO.

Atmel Corporation 

Introduction

Summary

   ATZB-S1-256-3-0-C ZigBit® is an ultra-compact and low-power 2.4GHz IEEE 802.15.4/ZigBee® OEM module from Atmel. Based on the innovative mixed-signal hardware platform from Atmel, this module uses the ATmega256RFR2 SoC with the AVR 8-Bit Microcontroller and a high data rate transceiver for the 2.4GHz ISM band. The radio transceiver provides high data rates from 250kb/s up to 2Mb/s, frame handling, outstanding receiver sensitivity and high transmit output power enabling a very robust wireless communication. The module is designed for wireless sensing, monitoring, control, data acquisition applications, to name a few. This ZigBit module eliminates the need for costly and timeconsuming RF development, and shortens time-to-market for wireless applications.

   The module has an MS-147 RF connector that can be used as an RF test port. The built-in chip antenna is designed and tuned for the ZigBit design to enable quick integration of the ZigBit into any application.

Features

• Ultra compact size (30.0 × 20.0mm)

• High RX sensitivity (-97dBm)

• Outperforming link budget (up to 100.6dB)

• Up to +3.6dBm output power

• Very low power consumption:

   • 9.6mA in RX mode (1)

   • 16.4mA in TX mode (1)

   • 0.6µA in sleep mode (2)

• Ample memory resources (256K Bytes In-System, Self-Programmable Flash memory, 8K Bytes EEPROM, 32K Bytes SRAM)

• Wide range of interfaces (both analog and digital)

   • 4- wire SPI, TWI

   • ISP, JTAG

   • 2 Analog comparator Input

   • UART, USART

   • Timer, PWM

   • 4 ADC lines

   • External Clock Input, Internal Clock Output

   • Upto 31 lines configurable as GPIO

• Preassigned Atmel® MAC address that can be used on end product

• Capability to use MAC address into the internal EEPROM

• IEEE® 802.15.4 compliant Transceiver

• 2.4GHz ISM band

• Serial bootloader

• High Performance Low power AVR® 8-bit Microcontroller

• Rapid design-in with built-in Chip Antenna

• RF Test point using MS-147 RF connector

• Small physical footprint and low profile for optimum fit in very small application boards

• Mesh networking capability

• Easy-to-use low cost development kit

• Single source of support for HW and SW

• Worldwide license-free operation

Share Link: