CL-PS6700-VC-A Datasheet PDF - Cirrus Logic

OVERVIEW
The CL-PS6700 connects directly to a PC Card (PCMCIA) Release 2.01 socket and has a custom interface to the CL-PS7111 microcontroller. The CL-PS7111 can support up to two CL-PS6700 devices, which allows up to two PC Card sockets per system. Addresses and data are passed to the CL-PS6700 through 16 bits of the 32-bit Data bus (D[15:0]).

FEATURES
■ Direct interface to CL-PS7111 low-power microcontroller
    — Custom multiplexed address/data bus for low pin count
    — Supports 13- and 18-MHz operating frequencies
■ Fully compatible with PC Card (PCMCIA) Release 2.01 specification
■ One or two CL-PS6700s per system
■ Low power states
    — Operating (25 mW, typical)
    — Idle
    — Standby (virtually zero power drain)
■ Support for PC Card hot insertion and removal
■ Read and write buffers
■ Support for 3.3- and 5-V PC Cards
■ Endian conversion
■ Supports the following PC Cards:
    — Memory-only card; flash, EPROM, or SRAM
    — I/O card; modem and communications
    — Cards configured as both I/O and memory
    — DMA-capable cards (through software emulation)
■ 100-pin VQFP package