CXP921064A Datasheet PDF - Sony Semiconductor

Description
The CXP921064A is a CMOS 16-bit microcomputer integrating on a single chip an A/D converter, serial interface, I2C bus interface, timer, real-time pulse generator, clock prescaler, remote control receive circuit, and as well as basic configurations like a 16-bit CPU, ROM, RAM, and I/O port.
This LSI also provides the sleep/stop functions that enable lower power consumption.

FEATUREs
• An efficient instruction set as a controller
   — Direct addressing, numerous abbreviated forms, multiplication and division instructions
• Instruction sets for C language and RTOS
   — Highly quadratic instruction system, general purpose register of eigth 16-bit × 16-bank configuration
• Minimum instruction cycle 100ns at 20MHz operation (2.7 to 3.3V)
                                      61µs at 32kMHz operation (2.2 to 3.3V)
• Incorporated ROM capacity 256K bytes
• Incorporated RAM capacity 10K bytes
• Peripheral functions
   — A/D converter 8-bit 12 analog input, 2 channels successive approximation system, automatic scanning function, (Conversion time: 3.4µs at 20MHz)
   — Serial interface 128 -byte buffer RAM, 3 channels 8-stage FIFO, 1 channel (supports special mode master/slave)
   — I2C bus interface 64-byte buffer RAM , 2 channels (supports master/slave and automatic transfer mode)
   — Timers 8-bit timer/counter, 2 channels (with timing output) 16-bit timer, 3 channels
   — Real-time pulse generator 5-bit output, 1 channel (2-stage FIFO)
   — Clock prescaler
   — Remote control receive circuit 8-bit pulse measurement counter, 8-stage FIFO
• Interruption 30 factors, 30 vectors, multi-interruption and priority selection possible
• Standby mode Sleep/stop
• Package 100-pin plastic QFP/LQFP 
              104-pin plastic LFLGA
• Piggy/evaluation chip CXP921000A
• FLASH EEPROM incorporated version CXP921F064A