DEV-14056 Datasheet PDF - SparkFun Electronics

Description:
   The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.5 comes with headers already attached and pre-flashed with a bootloader so you can program it using the onboard USB connection; no external programmer needed! You can program for the Teensy in your favorite program editor using C, or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it!

FEATUREs:
   120MHz ARM Cortex‐M4 with Floating Point Unit
   512K Flash, 192K RAM, 4K EEPROM
   Microcontroller Chip MK64FX512VMD12
   1 CAN Bus Port
   16 General Purpose DMA Channels
   5V Tolerance on All Digital I/O Pins
   62 I/O Pins (42 breadboard friendly)
   25 Analog Inputs to 2 ADCs with 13‐bit resolution
   2 Analog Outputs (DACs) with 12‐bit resolution
   20 PWM Outputs (Teensy 3.6 has 22 PWM)
   USB Full‐Speed (12Mbit/sec) Port
   Ethernet mac, capable of full 100Mbit/sec speed
   Native (4‐bit SDIO) microSD card port
   I2S Audio Port, 4‐Channel Digital Audio Input and Output
   14 Hardware Timers
   Cryptographic Acceleration Unit
   Random Number Generator
   CRC Computation Unit
   6 Serial Ports (2 with FIFO and Fast Baud Rates)
   3 SPI Ports (1 with FIFO)
   3 I2C Ports
   Real‐Time Clock (RTC)
   Pre‐soldered Headers