DEV-15083 Datasheet PDF - SparkFun Electronics

SparkFun Qwiic Twist - RGB Rotary Encoder Breakout

   The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to our Qwiic Connect System. The Twist takes care of all the various interrupts, switches, PWMing of LEDs, and presents all those features over an easy-to-use I2C interface. The Qwiic Twist was designed to get rid of the large mass of wires that are needed to implement an RGB encoder in a breadboard enabling you to stop messing around with interrupt debugging and get back to your project! Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

FEATURES
• Voltage: 3.3V
• Current:
   o Approximately 2.8mA LEDs off
   o Approximately 40.6mA with LEDs on 100%
• 24 ticks per rotation
• Clockwise and counterclockwise direction is detected
• Software configurable I2C address - up to 111 devices on a single bus
• Built-in momentary button
• RGB LED controlled via PWM allowing for up to 16M colors
• Up to 400kHz I2C communication
• Jumpers for address selection, interrupt pull up disable, and I2C pull up disable
• I2C Address: 0x3F (Jumper Open, Default), 0x3E (Jumper Closed)
• 2x Qwiic Connectors