DS28E05 Datasheet PDF - Maxim Integrated

General Description
The DS28E05 is a 112-byte user-programmable EEPROM organized as 7 pages of 16 bytes each. Memory pages can be individually set to write protected or EPROM emulation mode through protection byte settings. Each part has its own guaranteed unique 64-bit ROM identification number (ROM ID) that is factory programmed into the chip. The DS28E05 communicates over Maxim Integrated’s single contact 1-Wire® interface at overdrive speed with the ROM ID acting as node address in the case of a multiple-device 1-Wire network.

FEATUREs
●  Single-Contact 1-Wire Interface
●  112 Bytes User EEPROM with 1K Write Cycles
●  Programmable Write Protection and OTP EPROM Emulation Modes for User Memory
●  Unique Factory-Programmed 64-Bit ROM ID Number
●  Communicates with Host at Up to 76.9kbps (Overdrive Only)
●  Operating Range: 2.75V to 3.63V, -40°C to +85°C
●  ±8kV HBM ESD Protection (typ) on IO Pin
●  3-Pin SOT23 and 6-Pin TSOC Packages

APPLICATIONs
●  Accessory/PCB Identification
●  Medical Sensor Calibration Data Storage
●  Analog Sensor Calibration
●  Aftermarket Management of Consumables