DTL2A-LC Datasheet PDF - DATEL Data Acquisition products

DATEL’s new DTL2A-LC is an optically isolated, digitally programmable, serial-input electronic load designed for use in burn-in, characterization and test of today’s low-voltage power supplies and power components. The DTL2A-LC is essentially a digitally controlled current source that can sink currents from 0 to 20 Amps, at loading voltages as low as 0.6 Volts, up to a maximum power of 100 Watts.

FEATUREs
■ 12-bit, optically isolated (500Vdc), CMOS/TTL-compatible serial input
■ Output load voltages as low as 0.6 Volts
■ Output current 0-20A in 5mA increments
■ Output power to 100 Watts
■ 10MΩ minimum output impedance
■ ±10mA offset error; ±0.4% gain error
■ 100µsec full-scale step response
■ Operate in parallel for higher power
■ Miniature, 2" x 2" metal package

APPLICATIONs
■ Static/dynamic power-supply burn-in
■ Power-supply test and characterization
■ Battery capacity testing
■ Current-source testing
■ Capacitor discharge testing
■ Real-time load simulation