EVAL-SDP-CB1Z(RevB) Datasheet PDF - Analog Devices

GENERAL DESCRIPTION
The ADAS1000/ADAS1000-1/ADAS1000-2 measure electro cardiac (ECG) signals, thoracic impedance, pacing artifacts, and lead-on/lead-off status and output this information in the form of a data frame supplying either lead/vector or electrode data at programmable data rates. Its low power and small size make it suitable for portable, battery-powered applications. The high performance also makes it suitable for higher end diagnostic machines.

FEATURES
    Biopotential signals in; digitized signals out
    5 acquisition (ECG) channels and one driven lead
    Parallel ICs for up to 10+ electrode measurements Master ADAS1000 or ADAS1000-1 used with slave ADAS1000-2
    AC and dc lead-off detection
    Internal pace detection algorithm on 3 leads Support for user’s own pace
    Thoracic impedance measurement (internal/external path)
    Selectable reference lead
    Scalable noise vs. power control, power-down modes
    Low power operation from 11 mW (1 lead), 15 mW (3 leads), 21 mW (all electrodes)
    Lead or electrode data available
    Supports AAMI EC11:1991/(R)2001/(R)2007, AAMI EC38 R2007, EC13:2002/(R)2007, IEC60601-1 ed. 3.0 b:2005, IEC60601-2-25 ed. 2.0 :2011, IEC60601-2-27 ed. 2.0 b:2005, IEC60601-2-51 ed. 1.0 b: 2005
    Fast overload recovery
    Low or high speed data output rates
    Serial interface SPI-/QSPI™-/DSP-compatible
    56-lead LFCSP package (9 mm × 9 mm)
    64-lead LQFP package (10 mm × 10 mm body size)

APPLICATIONS
    ECG: monitor and diagnostic Bedside patient monitoring, portable telemetry, Holter, AED, cardiac defibrillators, ambulatory monitors, pace maker programmer, patient transport, stress testing