EZ80L92AZ020SG Datasheet PDF - Zilog

Architectural Overview

   The eZ80L92 microcontroller is a high-speed single-cycle instruction-fetch microcontroller with a maximum clock speed of 50MHz. The eZ80L92 MCU is a member of ZiLOG’s eZ80Acclaim!™ family of Flash microcontrollers. It can operate in Z80-compatible addressing mode (64KB) or full 24-bit addressing mode (16MB). The rich peripheral set of the eZ80L92 MCU makes it suitable for a variety of applications including industrial control, embedded communication, and point-of-sale terminals.

FEATUREs
• Single-cycle instruction fetch, high-performance, pipelined eZ80® CPU core1
• Low power features including SLEEP mode, HALT mode, and selective peripheral power-down control
• Two UARTs with independent baud rate generators
• SPI with independent clock rate generator
• I2C with independent clock rate generator
• Infrared Data Association (IrDA)-compliant infrared encoder/decoder
• New DMA-like eZ80® instructions for efficient block data transfer
• Glueless external peripheral interface with 4 Chip Selects, individual Wait State generators, and an external WAIT input pin—supports Intel-and Motorola-style buses
• Fixed-priority vectored interrupts (both internal and external) and interrupt controller
• Real-time clock with on-chip 32KHz oscillator, selectable 50/60Hz input, and separate VDD pin for battery backup
• Six 16-bit Counter/Timers with prescalers and direct input/output drive
• Watch-Dog Timer
• 24 bits of General-Purpose I/O
• JTAG and ZDI debug interfaces
• 100-pin LQFP package
• 3.0–3.6V supply voltage with 5V tolerant inputs
• Operating Temperature Range
   – Standard: 0ºC to +70ºC
   – Extended: –40ºC to +105ºC