FLCSS3.0BU Datasheet PDF - PANDUIT CORP.

LC Fiber Optic Connectors – Field Polish Termination

• TIA/EIA-604 FOCIS-10 compatible connectors
• Exceed TIA/EIA-568-B.3 requirements
• Connector housing and boot colors follow TIA/EIA-568-C.3
   suggested color identification scheme
• Insertion loss: 0.10dB average (multimode
   and singlemode)
• Return loss: >20dB (multimode), >40dB (singlemode)
• Non-optical disconnect maintains data transmission under
   tensile loads for jacketed cable
• Each simplex connector includes connector body/ferrule
   assembly, crimp sleeve, one boot for 900µm buffered fiber
   and one boot for 1.6mm – 2.0mm jacketed cable and
   one dust cap; 3.0mm jacketed cable connectors are also
   available separately
• Each duplex connector includes two connector
   body/ferrule assemblies, two crimp sleeves, two boots for
   1.6mm – 2.0mm or 3.0mm jacketed cable or two boots for
   900µm buffered fiber, two dust caps and one duplex clip
• LC duplex clip available separately for duplexing two
   simplex Panduit LC Connectors
• Fiber cable type: tight-buffered recommended
• Fiber cable size: accept 1.6mm – 2.0mm or 3.0mm
   jacketed cable, or 900µm buffered fiber (noted in
   part description)
• For 250µm coated fiber termination, use 250 micron fiber
   build-up tube kit or fan-out kits on pages C.27 – C.28
• Ferrule type: 1.25mm zirconia ceramic (highest durability
   for repeated matings)
• Field polish termination – Panduit recommends
   anaerobic adhesive on pages C.103, C.104
• Use field polish termination kit (FIELDKIT) on pages
   C.103, C.104 of SA-NCCB51.