GPR25L12806F-QS13X Datasheet PDF - Generalplus Technology Inc.

GENERAL DESCRIPTION
The GPR25L12806F (128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#/ RESET#). The Dual I/O data is transferred with speed of 208Mbits/s and the Quad I/O & Quad output data is transferred with speed of 416Mbits/s.

FEATURES
â—† 128M-bit Serial Flash
   -16384K-byte
   -256 bytes per programmable page
â—† Standard, Dual, Quad SPI
   -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#/ RESET#
   -Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#/ RESET#
   -Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
â—† High Speed Clock Frequency
   -104MHz for Standard and Dual SPI fast read with 30PF load
   -Dual I/O Data transfer up to 208Mbits/s
   -Quad I/O Data transfer up to 416Mbits/s
â—† Software/Hardware Write Protection
   -Write protect all/portion of memory via software
   -Enable/Disable protection with WP# Pin
   -Top/Bottom Block protection
â—† Allows XIP (execute in place) Operation
   -Continuous Read With 8/16/32/64-byte Wrap
â—† Minimum 100,000 Program/Erase Cycles
â—† Data Retention
   -20-year data retention typical
â—† Fast Program/Erase Speed
   -Page Program time: 0.6ms typical
   -Sector Erase time: 50ms typical
   -Block Erase time: 0.2/0.3s typical
   -Chip Erase time: 60s typical
â—† Flexible Architecture
   -Uniform Sector of 4K-byte
   -Uniform Block of 32/64k-byte
â—† Low Power Consumption
   -25mA maximum active current
   -5uA maximum power down current
â—† Advanced Security Features
   -3x1024-Byte Security Registers With OTP Locks
â—† Single Power Supply Voltage
   -Full voltage range:2.7~3.6V
â—† Package Information
   -SOP8 (208mil)