HCPL-2730 Datasheet PDF - Avago Technologies

Description
These dual channel optocouplers contain a separated pair of GaAsP light emitting diodes optically coupled to a pair of integrated high gain photo detectors. They provide extremely high current transfer ratio and excellent input-output common mode transient immunity. A separate pin for the photodiodes and frst gain stages (VCC) permits lower output saturation voltage and higher speed operation than possible with conventional photodarlington type optocouplers. In addition, VCC may be as low as 1.6V without adversely affecting the parametric performance.

FEATUREs
• High current transfer ratio – 1800% typical
• Low input current requirements – 0.5 mA
• Low output saturation voltage – 0.1 V
• High density packaging
• Performance guaranteed over temperature 0°C to 70°C
• LSTTL compatible
• High output current – 60 mA
• Safety approval:
   UL recognized – 3750 V rms for 1 minute and
                              5000V rms* for 1 minute
   CSA approved
• Available in 8 pin DIP and SO-8 footprint
• MIL-PRF-38534 hermetic version available
   (HCPL-5730/5731)
• Surface mount gull wing option available for 8-pin DIP
   (Option 300)

APPLICATIONs
• Digital logic ground isolation
• Telephone ring detector
• Level shifting
• EIA RS-232C line receiver
• Polarity sensing
• Low input current line receiver – long line or party line
• Microprocessor bus isolation
• Current loop receiver
• Line voltage status indicator – low input power dissipation