HT3-BC-035-01 Datasheet PDF - Samtec

NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 2.22N[0.5 LB].
3. INSPECT DIMENSION AT BOTH ENDS OF PART. ALL VISIBLE SOLDER CRIMPS TO BE CHECKED.
4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
5. PARTS TO BE PACKAGED IN TAPE AND REEL.
6. ATTACH LABEL "ASP-149117-01" TO EACH TAPE & REEL PACKAGE.
7. MEASUREMENT MUST BE TAKEN FROM THE LOWEST POINT OF THIS SURFACE (STANDOFF).
8. SOLDER COMPOSITION; 96.5% TIN/3.5% SILVER.
9. MEASUREMENT MUST BE TAKEN TO BACK CAP.
10. CHECK DIMENSION AT FIRST AND LAST ROW OF TAILS