IT8712F Datasheet PDF - ITE Tech. INC.

General Description
The IT8712F is a Low Pin Count Interface-based highly integrated Super I/O. The IT8712F provides the most commonly used legacy Super I/O functionality plus the latest Environment Control initiatives, such as H/W Monitor, Fan Speed Controller, ITE’s “SmartGuardian” function and Smart Card Reader Interface. The device’s LPC interface complies with Intel “LPC Interface Specification Rev. 1.0”. The IT8712F is ACPI & LANDesk compliant.

FEATUREs
„ Low Pin Count Interface
  − Comply with Intel Low Pin Count InterfaceSpecification Rev. 1.0
  − Supports LDRQ#, SERIRQ protocols
  − Supports PCI PME# Interfaces
„ ACPI & LANDesk Compliant
  − ACPI V. 1.0 compliant
  − Register sets compatible with “Plug and Play ISA Specification V. 1.0a”
  − LANDesk 3.X compliant
  − Supports 12 logical devices „ Enhanced Hardware Monitor
  − Built-in 8-bit Analog to Digital Converter
  − 3 thermal inputs from remote thermal resistor or thermal diode or diode-connected transistor
  − 8 voltage monitor inputs (VBAT is measured internally.)
  − 1 chassis open detection input with low power Flip-Flop backed by the battery
  − Watch Dog comparison of all monitored values
  − Provides VID0 – VID5 support for the CPU „ Fan Speed Controller
  − Provides fan on-off and PWM control
  − Supports 5 programmable Pulse Width
Modulation (PWM) outputs
  − 128 steps of PWM modes
  − Monitors 5 fan tachometer inputs „ SmartGuardian Controller
  − Provides programmable fan speed automatic control
  − Supports mix-and-match for temperature inputs and fan speed control outputs
  − Overrides fan speed controller during catastrophic situations
  − Provides over temperature beep tone warning
„ Two 16C550 UARTs
  − Supports two standard Serial Ports
  − Supports IrDA 1.0/ASKIR protocols
  − Supports Smart Card Reader protocols
(Continue ...)