L5955 Datasheet PDF - STMicroelectronics

Description
The L5955 is an integration of three high side drivers, six regulators and two stand-by regulators with RESET function developed to provide the power to a complete audio system.
The outputs of the IC are controlled by I2C bus and Enable pin.
The device is equipped with sequencing and slew rate controls for the st-by regulators.

FEATUREs
■ 2 stand-by regulators:
   3.3V (125mA)
   1.5V (300mA)
■ 6 regulators:
   10V (40mA)
   8.5V (200mA)
   3.3V (850mA)
   8/10V (1A)
   5/3.3/1.8V (200mA)
   1.8/2.5V(200mA)
■ All regulators are low dropout outputs
■ The different outputs voltage are controlled by I2C Bus.
■ Reg3 on/off controlled by enable
■ Reg1, Reg2, Reg4, Reg5, Reg6 on/off controlled by I2CBus.
■ 3 high side drivers:
   2A (HSD1)
   0.45A (HSD2 & HSD3)
■ No external charge pump capacitors are required
■ Stand-by mode controlled by EN pin for I2C
   Bus and Reg1, Reg2, Reg3, Reg4, Reg5,
   Reg6, HSD1, HSD2, HSD3
■ LVW function externally selectable
■ Individual thermal shutdown
■ Independent current limiting
■ Short circuit protection
■ Load dump protection and overvoltage shutdown