LXT972A Datasheet PDF - Intel

The LXT972A is an IEEE compliant Fast Ethernet PHY Transceiver that directly supports both 100BASE-TX and 10BASE-T applications. It provides a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MACs).
This document also supports the LXT972.
The LXT972A supports full-duplex operation at 10Mbps and 100Mbps. Its operating condition can be set using auto-negotiation, parallel detection, or manual control.
The LXT972A is fabricated with an advanced CMOS process and requires only a single 3.3V power supply.

Product Features
■ 3.3V Operation.
■ Low power consumption (300 mW typical).
■ 10BASE-T and 100BASE-TX using a single RJ-45 connection.
■ Supports auto-negotiation and parallel detection.
■ MII interface with extended register capability.
■ Robust baseline wander correction performance.
■ Standard CSMA/CD or full-duplex operation.
■ Configurable via MDIO serial port or hardware control pins.
■ Integrated, programmable LED drivers.
■ 64-pin Low-profile Quad Flat Package (LQFP).
   —LXT972ALC - Commercial (0° to 70°C ambient).
  
Applications
■ Combination 10BASE-T/100BASE-TX Network Interface Cards (NICs)
■ 10/100 PCMCIA Cards
■ Cable Modems and Set-Top Boxes