M24256-AWMN6T(2001) Datasheet PDF - STMicroelectronics

DESCRIPTION
These I2C-compatible electrically erasable programmable memory (EEPROM) devices are organized as 32Kx8 bits, and operate down to 2.5 V (for the M24256-AW).
The M24256-A is available in Plastic Dual-in-Line, Plastic Small Outline and Thin Shrink Small Outline packages. The M24256-A is also available in a chip-scale (SBGA) package.

This device is now designated as “Not for New Design”. Please use the M24256-B in all future designs (as described in application note AN1470).
■ Compatible with I2C Extended Addressing
■ Two Wire I2C Serial Interface
   Supports 400 kHz Protocol
■ Single Supply Voltage:
   – 4.5V to 5.5V for M24256-A
   – 2.5V to 5.5V for M24256-AW
■ 2 Chip Enable Inputs: up to four memories can
   be connected to the same I2C bus
■ Hardware Write Control
■ BYTE and PAGE WRITE (up to 64 Bytes)
■ RANDOM and SEQUENTIAL READ Modes
■ Self-Timed Programming Cycle
■ Automatic Address Incrementing
■ Enhanced ESD/Latch-Up Behavior
■ More than 100,000 Erase/Write Cycles
■ More than 40 Year Data Retention