MAS9181BN Datasheet PDF - Micro Analog systems

DESCRIPTION
The MAS9181 comprises eight digital to analog converters (DACs) each controlled by a two-wire I2C bus. The DACs are individually programmed using an 8- bit word to select an output from one of 256 voltage steps. The maximum output voltage of all DACs is set by Vmax and the resolution is Vmax/256. At power-on all outputs are set to their lowest value. The I2C-bus slave receiver has 3 programmable address pins (2 for MAS9181 CS).

FEATURES
• Rail to rail output stages
• Octal 8-bit DACs on a single monolithic chip
• Power supply range from +5 V to +12 V
• -20°C to +85°C temperature range
• 16-pin PDIL and SO package
• Power-up reset

APPLICATION
• Trimmer replacement
• AGC/AFT or TVs and VCRs
• Graphic equalizers
• High resolution monitors