MBM29F033C Datasheet PDF - Fujitsu

â–  GENERAL DESCRIPTION
The MBM29F033C is a 32M-bit, 5.0 V-Only Flash memory organized as 4M bytes of 8 bits each. The 2M bytes of data is divided into 64 sectors of 64K bytes for flexible erase capability. The 8 bit of data will appear on DQ0 to DQ7. The MBM29F033C is offered in a 40-pin TSOP package. This device is designed to be programmed in system with the standard system 5.0 V VCC supply. A 12.0 V VPP is not required for program or erase operations. The device can also be reprogrammed in standard EPROM programmers.

â–  FEATURES
• Single 5.0 V read, write, and erase
   Minimizes system level power requirements
• Compatible with JEDEC-standard commands
   Pinout and software compatible with single-power supply Flash Superior inadvertent write protection
• 40-pin TSOP (I) (Package suffix: PTN-Normal Bend Type, PTR-Reversed Bend Type)
• Minimum 100,000 write/erase cycles
• High performance
   70 ns maximum access time
• Sector erase architecture
   Uniform sectors of 64K bytes each Any combination of sectors can be erased. Also supports full chip erase
• Embedded EraseTM Algorithms
   Automatically preprograms and erases the chip or any sector
• Embedded ProgramTM Algorithms
   Automatically programs and verifies data at specified address
• Data Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready/BUSY output (RY/BY)
   Hardware method for detection of program or erase cycle completion
• Low VCC write inhibit ≤ 3.2 V
• Hardware RESET pin Resets internal state machine to the read mode
• Erase Suspend/Resume
   Supports reading or programming data to a sector not being erased
• Sector group protection
   Hardware method that disables any combination of sector groups from write or erase operation (a sector group consists of 4 adjacent sectors of 64K bytes each)
• Temporary sector groups unprotection
   Hardware method temporarily enable any combination of sectors from write or erase operations